SKF Rolamentos axiais de rolos cilíndricos

Contate agora

SKF cylindrical roller thrust bearings are designed to accommodate heavy axial loads and impact loads. They must not be subjected to any radial load. The bearings are very stiff and require little axial space.

Bearing features

Separable design
Shaft washer, housing washer, cylindrical roller and cage thrust assembly can be mounted separately.Extended bearing service life

To prevent stress peaks, the roller ends are relieved slightly to modify the line contact between the raceway and rollers.consist of a radial needle roller bearing and a cylindrical roller thrust bearingThe cylindrical roller and cage thrust assembly is identical to the 811 series.are supplied without an inner ringcan be combined with an inner ring , where the shaft cannot be hardened and ground must be ordered separately)can accommodate axial loads in one directioncan locate the shaft in one direction onlcan be mounted back-to-back for short shafts and where changes in length due to thermal expansion are relatively minorFor these types of arrangements, SKF recommends preloading the thrust ball bearings with Belleville washers (cup springs). This elastic preload helps to prevent the balls from skidding if one of the thrust bearings becomes unloaded. Preload also improves performance of the thrust ball bearings while reducing noise levels.

ver mais

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF 353166 B/HA3 Rolamentos axiais	N/A	Steel	51138	170 kN
SKF 634059 Conjuntos de pressão do rolo e da gaiola da agulha	0 Inch \| 0Millimeter	Bearing	4 Bolt Pillow Block;	4 Bolt Pillow Block
SKF 353115 Conjuntos de rolamentos personalizados	205	2220 kN	170 mm	205x340x192
SKF BFSB 353327/HA3 Rolamentos aparafusados	25 º	289.200 mm	2.0 mm	2.0 mm
SKF 353013 A Rolamentos axiais de rolos cônicos	0.0	N/A	Bearings	M06288
SKF 353153 Rolamentos axiais de rolos cilíndricos	38 mm	30x37x38	37 mm	37
SKF BFS-0004 E/HA3 Rolamentos axiais	0,4 mm	22	20 mm	25
SKF 634011 A Conjuntos de pressão do rolo e da gaiola da agulha	10,6	17,526 mm	22,225 mm	1,1 mm
SKF BFSB 353325/HA3 Conjuntos de rolamentos personalizados	2800 r/min	196 mm	162 mm	150 mm
SKF 617500 Rolamentos aparafusados	43 mm	2,1 mm	2,1 mm	373 kN
SKF 351761 A Rolamentos axiais de rolos cônicos	42 mm	15x42x19	15 mm	27,2 mm
SKF 350901 C Rolamentos axiais de rolos cilíndricos	105 mm	76 kN	110 mm	32 mm