SKF Rolamentos axiais de rolos cilíndricos

Contate agora

SKF cylindrical roller thrust bearings are designed to accommodate heavy axial loads and impact loads. They must not be subjected to any radial load. The bearings are very stiff and require little axial space.

Bearing features

Separable design
Shaft washer, housing washer, cylindrical roller and cage thrust assembly can be mounted separately.Extended bearing service life

To prevent stress peaks, the roller ends are relieved slightly to modify the line contact between the raceway and rollers.consist of a radial needle roller bearing and a cylindrical roller thrust bearingThe cylindrical roller and cage thrust assembly is identical to the 811 series.are supplied without an inner ringcan be combined with an inner ring , where the shaft cannot be hardened and ground must be ordered separately)can accommodate axial loads in one directioncan locate the shaft in one direction onlcan be mounted back-to-back  for short shafts and where changes in length due to thermal expansion are relatively minorFor these types of arrangements, SKF recommends preloading the thrust ball bearings with Belleville washers (cup springs). This elastic preload helps to prevent the balls from skidding if one of the thrust bearings becomes unloaded. Preload also improves performance of the thrust ball bearings while reducing noise levels.

SKF BFSB 353320/HA4 Rolamentos axiais

240 mm 370
GE 240 HCR-2RS 370 mm

SKF BFSB 353312/HA1 Conjuntos de pressão do rolo e da gaiola da agulha

Round 4.6300 in
3-1/4 in 207

SKF BFSB 353210 Conjuntos de rolamentos personalizados

400 mm 155
GE 280 ET 2RS 280 mm

SKF BFSB 353901/HA4 Rolamentos aparafusados

CRAFT 58,000
4.5 58x110x115

SKF 351573 Rolamentos axiais de rolos cônicos

19,6 80
80x95x25 INA

SKF BFSB 353247 Rolamentos axiais de rolos cilíndricos

34 mm 6220
100 mm 100

SKF BFSB 353201 Rolamentos axiais

78.1 mm 0.41 Hz
78.1 mm 65 mm

SKF BFSB 353285/HA4 Conjuntos de pressão do rolo e da gaiola da agulha

110 27 mm
27 110 mm

SKF BFS 8000/HA1 Conjuntos de rolamentos personalizados

CX 38,1
8,1 mm 0,49 Kg

SKF 350998 Rolamentos aparafusados

8483.20.40.80 3/4 Inch
Flanged Flange Block

SKF 353164 Rolamentos axiais de rolos cônicos

0.2810 in 1.3120 in
KG 1/4-28

SKF BFSB 353205 Rolamentos axiais de rolos cilíndricos

FYH 55,6 mm
184 mm 14,4
1/10