- FII Machinery Manufacturing Co. LTD
- Timken Rolamentos cilíndricos Toyana Rolamentos de agulha RHP Rolamentos de esferas auto-alinhados
Português- EndereçoYongmyeonggongdan-Gil, Gyeongsangbuk-Do, 876-203 Coreia
- Telefone(Tempo de Trabalho)852-2765-5875
- Telefone(O tempo de trabalho não)852-2765-5875
RHP Rolamentos de esferas auto-alinhados
Contate agoraSelf-Aligning Ball Bearings are ideal when the alignment of the shaft and housing is problematic and the shaft may bend. The outer ring has a spherical raceway with its center of curvature coinciding with the bearing. This allows the axis of the inner ring, balls and cage to deflect to some extent around the bearings center. The axial load capacity is low since the contact angle is small. Under normal loads, the permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees).
Product Features and Benefits:
High quality steel - Ultra clean steel helps extend bearing life extended up to 80%
Pressed steel and polyamide cages available
Advanced Grease Technology - Lubricants that can extend grease life and performance
High grade balls - Smooth and quiet operation even at high speeds
Super Finished Raceways - Refined to minimize noise and improve lubricant life and distribution
Sealed versions are available
12,7 mm x 41,275 mm x 15,875 mm RHP NMJ1/2 Rolamentos de esferas auto-alinhados
| 0.93 | Single-Row Non-Fill |
| Yes | No |
63,5 mm x 139,7 mm x 31,75 mm RHP NMJ2.1/2 Rolamentos de esferas auto-alinhados
| 143 kN | 33 |
| 3577 r/min | 2,8 Kg |
57,15 mm x 114,3 mm x 22,225 mm RHP NLJ2.1/4 Rolamentos de esferas auto-alinhados
| 73.4 mm | 0,29 |
| 101,6 | 165 kN |
107,95 mm x 222,25 mm x 44,45 mm RHP NMJ4.1/4 Rolamentos de esferas auto-alinhados
| 18000 | 11000 r/min |
| 20 | 22.5 |
41,275 mm x 88,9 mm x 19,05 mm RHP NLJ1.5/8 Rolamentos de esferas auto-alinhados
| 65,500 | 57,500 mm |
| 30,800 mm | KV57.5X65.5X30.8 |
120,65 mm x 209,55 mm x 33,3375 mm RHP NLJ4.3/4 Rolamentos de esferas auto-alinhados
| 13 mm | UKFS305 |
| 20 mm | 21,2 kN |
25,4 mm x 63,5 mm x 19,05 mm RHP NMJ1 Rolamentos de esferas auto-alinhados
| FAG | 28,7 mm |
| 1 mm | 0,855 kg / Weight |
19.05 mm x 47,625 mm x 14,2875 mm RHP NLJ3/4 Rolamentos de esferas auto-alinhados
| 4,37 | 355 mm |
| 23,5 mm | 6 mm |
101,6 mm x 215,9 mm x 44,45 mm RHP NMJ4 Rolamentos de esferas auto-alinhados
| 1800 r/min | 2,01 |
| 170 mm | 1260 kN |
44,45 mm x 95,25 mm x 20,6375 mm RHP NLJ1.3/4 Rolamentos de esferas auto-alinhados
| 480 | 360 |
| 44,45 mm x 95,25 mm x 20,6375 mm | 90 mm |
15,875 mm x 46,0375 mm x 15,875 mm RHP NMJ5/8 Rolamentos de esferas auto-alinhados
| 23,5 mm | 360 |
| 232 | 4900 kN |