RHP Rolamentos de esferas auto-alinhados

Contate agora

Self-Aligning Ball Bearings are ideal when the alignment of the shaft and housing is problematic and the shaft may bend. The outer ring has a spherical raceway with its center of curvature coinciding with the bearing. This allows the axis of the inner ring, balls and cage to deflect to some extent around the bearings center. The axial load capacity is low since the contact angle is small. Under normal loads, the permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees).

Product Features and Benefits:

High quality steel - Ultra clean steel helps extend bearing life extended up to 80%

Pressed steel and polyamide cages available

Advanced Grease Technology - Lubricants that can extend grease life and performance

High grade balls - Smooth and quiet operation even at high speeds

Super Finished Raceways - Refined to minimize noise and improve lubricant life and distribution

Sealed versions are available

ver mais

Bearing Number	Bore Dia	Outer DIa	Width	Size
12,7 mm x 33,3375 mm x 9,525 mm RHP NLJ1/2 Rolamentos de esferas auto-alinhados	14,288 mm	0,1384 Kg	CYSD	14,288 mm
152,4 mm x 304,8 mm x 57,15 mm RHP NMJ6 Rolamentos de esferas auto-alinhados	14 mm	9,88 kN	26	2,85
101,6 mm x 184,15 mm x 31,75 mm RHP NLJ4 Rolamentos de esferas auto-alinhados	17 mm	11,5 mm	R1/8"	12,8 kN
139,7 mm x 279,4 mm x 50,8 mm RHP NMJ5.1/2 Rolamentos de esferas auto-alinhados	R154.12	VKBA 577	AUDI / 50 / engine	713610130
127 mm x 254 mm x 50,8 mm RHP NMJ5 Rolamentos de esferas auto-alinhados	100 kN	3,6 mm	44,45 mm	44,45
47,625 mm x 114,3 mm x 26,9875 mm RHP NMJ1.7/8 Rolamentos de esferas auto-alinhados	9,55 mm	22 mm	2,24 kN	6 mm
95,25 mm x 209,55 mm x 44,45 mm RHP NMJ3.3/4 Rolamentos de esferas auto-alinhados	http://www.ina.com	INA	Needle Non Thrust Ro	22 mm